Quick Summary
• Kentstrapper makes Material Extrusion systems in Italy. Now the firm has released the 1,000 × 1,000 × 1,000 mm build volume Mille system. The one-cubic-meter build volume is actively heated by...
Additional Context
Kentstrapper makes Material Extrusion systems in Italy. Now the firm has released the 1,000 × 1,000 × 1,000 mm build volume Mille system. The one-cubic-meter build volume is actively heated by six independent pads across the build floor. You can slide out the print bed to remove parts. The build chamber temperature can reach 60°C while the bed can be heated to 120°C. The Magnetic Extrusion System means that you can swap toolheads quickly without any tools at all. Layer height is 0.1 to 1.2 mm, and nozzle sizes are from 0.4 to 1.4 mm. The printer has two Mantis extruders, and if one is blocked, the other can take over. The printer has been tested with PLA, PETG, ASA, ASA-CF, ABS, TPU, PA GF, PA CF, and PPS CF materials. The company sure has come a long way since we covered their plywood Gal