← Back to news
3D Printing Industry ·

IMI and TotalEnergies qualify printed nickel alloy trims for sour gas

IMI and TotalEnergies qualify printed nickel alloy trims for sour gas

Quick Summary

• TotalEnergies EP Denmark has installed seven anti-surge valves fitted with additively manufactured nickel-based alloy disk stacks from IMI. The parts work in a sour-gas environment where hydrogen sulphide (H₂S) partial pressures reach up to 3.3 kPa. The 3D printed parts passed DNV-ST-B203 AMC Level 3 qualification, and tests showed they performed as well as conventionally…

Additional Context

TotalEnergies EP Denmark has installed seven anti-surge valves fitted with additively manufactured nickel-based alloy disk stacks from IMI. The parts work in a sour-gas environment where hydrogen sulphide (H₂S) partial pressures reach up to 3.3 kPa. The 3D printed parts passed DNV-ST-B203 AMC Level 3 qualification, and tests showed they performed as well as conventionally manufactured nickel-alloy components. TotalEnergies then approved them for use.

The parts were produced by Laser Powder Bed Fusion (LPBF). IMI developed a proprietary heat treatment for sour-service conditions to go with them. The deployment is a practical example of additive manufacturing being used in a safety-critical application.

Fixing valve passing under H₂S exposure

The project began with an operating problem: v

Read original on 3D Printing Industry

Related Stories